Standard time is a calculated Planzeit, which is described with factors of influence. The standard time is the time, the one normally practiced and trained person, with an output a work quality prescribed of 100% achievement degrees (standard capacity or as fixed in the tariff reference performance), with consideration of distribution and if necessary recovery periods over the layer duration, with, to reach can. The standard time is determined thereby by longer observation of operational sequences. Thus e.g. for each Produktionsablauf the total time for the production of a product is determined. The determination of the standard time is thus a substantial size for the price calculation of a product or a service.

Example

• An experienced mechanic is to install 40 left car doors, car the running by an assembly-line within a layer - usually 8 working hours -. From this is calculated a Vorgabezit of: 8 hr. = 480 minutes divided by the number of car doors = 12 minutes/per car door = 100% achievement. This standard time applies naturally also to the mechanic, who is to install the right car doors.

From it a chain of standard times results, since each handle must be planned accurately exactly temporally limited and to set therefore results in it little sense - related to our example - the standard time for the door assembly on 12 minutes per door if afterwards with the fender assembly 15 minutes are necessary - thus a rule-fair back-up would form there.

Factors of influence

There is almost an unlimited selection of factors of influence those the standard time more or less directly or indirectly affects. In the following a few examples for it.

• The person is health not fit and in the achievement reduced.
• Necessary material is missing, or only in insufficient quantity.
• A Verkehrsstau obstructs the punctual feed of a commodity.
• Necessary pre-working, or were not not in time furnished.

Articles in category "Standard time"

We found here 2 articles.

Related Websites

We found here 6 related websites.

• Current time around the World and standard time zones map of the world
  World Time Zones and time map with current time around the World and countries operating Daylight Savings Time sunclock map shows what part of the world is ...


• End Daylight Saving Time
  The Uniform Time Act of 1966 provided the basic framework for alternating between daylight saving time and standard time, which we now observe in the United ...


• The official US time - clock
  Right now, the official US time is:. Change time zone, You have chosen the timezone, Problems · About · Exhibits ...


• TIME ZONE CONVERSIONS
  STANDARD TIME ZONE CONVERSIONS. Conversions from UTC to some US time zones: ... STANDARD, MOUNTAIN STANDARD, CENTRAL STANDARD, EASTERN STANDARD ...


• United States Code
  Weights, measures and standard time.


• What time is it
  US Naval Observatory Master Clock Time ... Jul. 01, 01:03:24 PM AKDT Jul. 01, 11:03:24 AM HAST. Time Service Department, US Naval Observatory.